HART E018-P, Руководство пользователя, Страница: 21 / 64

E018-P User Manual
FW_E018-P_M_v0301-01_EN Page 21
10 OTHERS DEFAULT
10.1 MODEL - -
10.2 SOFTWARE VERSION xx.xx.xx -
10.3 SERIAL NUMBER xxxxxxx -
10.4 PASSWORD
0000 - 9999 (0000 = off) 0000
10.5 KEY LOCK enable, disable enable
10.6 TAG NUMBER 0000000 - 9999999 0000000
5.5 SETUP MENU EXPLANATIONS
5.5.1 MENU 1: TOTAL
When a different unit is selected, the actual total values are NOT recalculated.
The settings for total and flowrate are separate. This means different units of measurement can be
used for each, for example, cubic meters for total and liters for flowrate.
See
Menu 5: Flowmeter [»24]
on how to calculate and configure the K-factors for Total and
Flowrate.
1 TOTAL
1.1 UNIT Determines the measurement unit for total, accumulated total, and the
scaled pulse output. The following units can be selected:
l – m3 – US gal – I gal – cf – Oil bbl – kg – ton – US ton – lb- ----(no unit).
1.2 DECIMALS
Determines for Total and Accumulated Total the number of digits after the
decimal point.
1.3 K-FACTOR This value is used to convert the flowmeter pulse signals into a total unit.
The
K-Factor is based on the number of pulses generated by the flowmeter
per selected measurement unit, as defined in
1.1: TOTAL > UNIT
.
The more accurate the K‑Factor , the more accurate the system.
After pressing PROG, the decimal point will start to flash. The decimal
position can then be changed by pressing the SELECT-key, then press the
CLEAR key to set the digits.
1.4 CLEAR PASSWORD A password can be set up to prevent the operator from accidentally clearing
the Total. This password can have up to 3 digits, for example 123.
To disable password protection, enter three zeros (000).
5.5.2 MENU 2: FLOWRATE
The settings for total and flowrate are separate. This means different units of measurement can be
used for each, for example, cubic meters for total and liters for flowrate.
See
Menu 5: Flowmeter [»24]
on how to calculate and configure the K-factors for Total and
Flowrate.
The display update time for flowrate is one second or more.
2 FLOWRATE
2.1 UNIT Determines the measurement unit for flowrate. The following units can be
selected:
mL; L; m3; US gal; I gal; cf; oilbbl; nL; nm3; scf; g; kg; ton; lb; US ton; rev;
---- (none)
Alteration of the measurement unit will NOT affect operator and SETUP-
level values. The K-factor has to be adapted as well; the calculation is not
done automatically!