HART E018-P, Руководство пользователя, Страница: 20 / 64

User Manual E018-P
Page 20 FW_E018-P_M_v0301-01_EN
3 ALARM DEFAULT
3.1 FLOWZERO default, no relays, ignore ignore
3.2 ALARM LOW-LOW 0000.000 - 9999999 0
3.3 ALARM LOW 0000.000 - 9999999 0
3.4 ALARM HIGH
0000.000 - 9999999 0
3.5 ALARM HIGH-HIGH 0000.000 - 9999999 0
3.6 DELAY LOW-LOW 0.0 - 999.9 seconds 0.0 sec
3.7 DELAY LOW 0.0 - 999.9 seconds 0.0 sec
3.8 DELAY HIGH
0.0 - 999.9 seconds 0.0 sec
3.9 DELAY HIGH-HIGH 0.0 - 999.9 seconds 0.0 sec
4 DISPLAY DEFAULT
4.1 FUNCTION total, flowrate, acc. total flowrate
4.2 ALARM SET operator, setup, hidden operator
4.3 LCD NEW fast, 1 sec, 3 secs, 15 secs, 30 secs, off 1 sec
4.4 BACKLIGHT
(BRIGHTNESS) 0%, 20%, 40%, 60%, 80%, 100% 100%
4.5 BACKLIGHT (ALARM) off, flash, on (red backlight indication during flowrate alarm
condition) off
4.6 BARGRAPH enable, disable enable
4.7 RATESPAN 0000000 - 9999999 9999
5 FLOWMETER DEFAULT
5.1 SIGNAL
NPN, NPN_LP, REED, REED_LP, PNP, PNP_LP, NAMUR,
Coil_Hi, Coil_Lo, Act_8.2 (8.2V DC), Act_24 (24V DC) Coil_Lo
6 LINEARIZATION DEFAULT
6.1...F FREQ. / M-FACTOR
1 ... 15
Frequency: 0000.1 - 9999.9 Hz
M-Factor: 0.000001 - 9.999999 0.0 Hz
1.000000
6.G LINEARIZATION enable, disable disable
6.H DECIMALS
FREQUENCY 0, 0.1, 0.02, 0.003 0.1
7 ANALOG OUTPUT DEFAULT
7.1 RATE MIN (4MA) -999999 - 999999 0
7.2 RATE MAX (20MA) -999999 - 999999 99999
7.3 TUNE MIN (4MA) 0000 - 9999 -
7.4 TUNE MAX (20MA) 0000 - 9999 -
8 RELAY OUTPUTS DEFAULT
8.1 RELAY 1
off - lo-lo - lo - hi - hi-hi - all - scaled - retransmit off
8.2 RELAY 2 off - lo-lo - lo - hi - hi-hi - all - scaled off
8.3 RELAY 3 off - lo-lo - lo - hi - hi-hi - all - scaled off
8.4 RELAY 4 off - lo-lo - lo - hi - hi-hi - all - scaled off
8.5 WIDTH
0.000 - 9.999 sec (0.000 = off) 0.000
8.6 AMOUNT 0000.000 - 9999999 per pulse 1000 L per
pulse
9 HART COMMUNICATION DEFAULT
9.1 ADDRESS 0 - 63 0
9.2 LOOP CURRENT enable, disable enable
9.3 LOOP TEST off - set 4 mA (fixed) - set 20 mA (fixed) off