HAND VALVE REPAIR
Hand valves are an integral par of the container and the valve bodies rarely need replace-
ment. However, the handwheel and internal part of the valves are renewable. The illustra-
tion below are exploded views of the valves replaceable parts used on Taylor-Wharton
liquid containers.
Valve Repair Kit
Fits: 3/8 in. or ½ in. Rego Globe of 3/8 in. Sherwood Valves.
KIT PARTS - KIT P/N 1750-9C35
Item No.
Description
Qty.
1
Screw and Washer
1
2
Spring Retainer
1
3
Retainer Washer
1
4
Spring
1
5
Seal Washer
1
6
Seal
1
7
Handwheel
1
8
Bonnet Washer
2
9
Bonnet
1
10
Stem Gasket
1
11
Stem
1
12
Seat Assembly
1
13
Bushing
1
14
Body
*
TQ
Torque 80 ft. lbf (11 kgf m)
1
*Not available as a repair part
Valve Disassembly Instructions
1. Open valve by turning Handwheel counterclockwise as far as it will go to release any
trapped gas in the system.
2. Using a screwdriver, remove Handwheel Screw and Washer by turning counterclock-
wise to allow removal of Spring Retainer, Washer, Spring, Seal Washer, Handwheel,
and Bonnet Washers. Discard these parts.
3. Using the large adjustable wrench to hold valve body, remove Bonnet by turning coun-
terclockwise with a 15/16 in. socket wrench that is capable of developing at least 80 ft
lbf (11 kgf m) torque.
4. Remove the following parts from the valve body and discard – Stem, Stem Gasket,
Seat Assembly and Bushing.
5. Inspect body and clean if necessary; be sure interior and seal areas are free from dirt,
residue and foreign particles.
CAUTION:
Do not apply force
after valve is fully
open.
CAUTION:
Do not scratch or mar
internal surfaces or
valves.
Hand Valve -
Exploded View
