9
10
Page 4
Code:
Product:
Sportset Beach Volleyball
1
2
3
2.55m
1
Insert the headline wire of the Volleyball Net (6) into the Clamcleat on the
outside of the dummy end and tie the opposite end to the ‘T’ point of the
Winder, as shown in figures 6a and 6b. Ensure the headline sits inside the
pulley grooves.
Net Assembly
2
Before tensioning the net, lift the top uprights using the handles until the
top of the pulley measures 2.55m from ground level. Secure the Top
Uprights in position by tightening the M10 Handwheels previously
inserted into the Bottom Uprights.
3
Using the Speed Brace and Universal Joint (9 & 10), winch
the headline until taught. Feed the adjustment rope through
the cleat on the inside of the uprights and pull down the net
until regulation height is achieved. As shown in figure 7.
Fig. 6a
Fig. 6b
4
Tie one end of each of the sidelines (supplied with net) to
the eyelets in the net. Feed the opposite end through a
Clamcleat (5) and wrap around the upright in the positions
shown in figure 7. Feed the lines back through the Clamcleat as
shown in figure 7a and pull taught until the desired net shape is
achieved.
Fig. 7
Fig. 7a
Sideline
Sideline
Bottom Line
Adjustment
Line
8
VOL-175
