Assembly Instructions
Code:
Product:
Page 2
Sportset Beach Volleyball
Turf Screw Installation
Beach Installation
Turf Installation
2
Using the Layout Guide Rope (RPP534), mark out 10.5m
post centres and dig a hole around 50mm deep to uncover
the moist sand. If the sand is particularly dry, moisten with
water. The Ground Turf Screws will not take to dry sand.
10.5m
50mm
10.5m
90mm
Fig. 2
Fig. 3
1
Using scissors (Do not use a knife), remove all the
packaging and identify the parts using the Pack Contents
and figure 1 overleaf.
3
Using a Turf Screw Insertion Tool, screw in the Ground Turf
Screws (8) until the top of the screw sits just below the
surface of the sand. Ensure the slots in the screw run parallel
to the court sidelines, as shown in figure 2.
1
Using the Layout Guide Rope, mark out 10.5m post centres
and, using the turf screw hole former (supplied with the Turf
Screw Insertion Tool), create a pilot hole for the turf screws,
as shown below in figure 3.
2
Screw in the Ground Turf Screws (8) until the top of the
screws sit around 90mm above ground level, as shown
below in figure 3. Ensure the slots in the screws sit parallel to
the court sidelines.
8
3
Excavate the turf/soil from around the turf screws to a depth of around 40mm. A Turf Screw Ground Removal Tool is
available as an optional extra. Please contact your distributor and quote part number BAR-033.
VOL-175
