Harris OTM-20, Руководство по установке и эксплуатации

Страница: 30 / 50

Operation
OTM-20 Installation and Operation Handbook 3-14
Figure 3-22. Laser Source Configuration
Laser On/Off
In the Laser Source menu, as shown in Figure 3-22, press [ ] to highlight Laser
On/Off and press ENTER to activate or deactivate the laser function. “*” indicates the
selected menu item. After the configuration is set, press the QUIT button to back out
to the higher-level menu. The selections are not saved to memory and return back to
the default value after the unit is powered off.
CW/MOD
In the Laser Source menu, as shown in Figure 3-22, press [ ] to scroll and
highlight CW/MOD. Press ENTER to access the Laser CW/MOD menu, as shown in
Figure 3-23 . Press [ ] to scroll and select the desired mode, and then press
ENTER to accept the selection. “*” indicates the selected menu item. After the
configuration is set, press the QUIT button to exit to the higher-level menu. The
selections are not saved to memory and return back to the default value after the unit is
powered off.
Figure 3-23. Laser CW/MD Configuration
The default set is CW (continuous wave).