Harris OTM-20, Руководство по установке и эксплуатации

Страница: 20 / 50

Operation
OTM-20 Installation and Operation Handbook 3-4
Table 3-2
.
Description of the GUI ( continued )
5 (cont) AC (not shown) The instrument is powered through an AC/DC adapter. When the
instrument is powered on and powered through the AC/DC adapter, the
batteries are automatically recharged. The battery symbol on the LCD
indicates charge status:
6 Auto Off This is the Auto Off enable indication. After powering on, the Auto-Off
function default status is enabled. If no buttons have been pressed for 5
minutes, the instrument will automatically turn off for the benefit of
conserving battery life.
Wavelength
In the Power Meter or Laser Source modes, the wavelength can be changed by pressing
[ ] and [ ].
Menu Configuration and Measurement Operation
When in the GUI, press the SET button to enter the Main Menu, as shown in
Figure 3-5 .
Figure 3-5. Main Menu
Press the button to scroll through the currently activated menu bar, then press the
ENTER button to enter the activated sub menu. Press the QUIT button to return to a
higher-level menu.
The Main Menu includes the following menu selections:
Power Meter
Laser Source
Auto Test
Recall