Harris InfoCaster R1000, Руководство по установке оборудования

Страница: 48 / 68

28 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
Configure VGA
Output
After you have installed and set up the VGA card in your system, select the
VGA Out output device from the drop-down list to begin configuring one or
more VGA displays.
Figure 2-10. Multi Head VGA Output Setup
If you have the Multi Head option you can run multiple instances of InfoCaster
on your system, each one displaying output on a different card head. Network
Managers can update and control each instance separately, and many of the
Configuration Utility tabs allow you to separately configure each instance.
VGA Setup Workflow
1 Before starting, install and configure the VGA card in your system.
See ”Video Output Card” on page 20 to learn more about ATI cards. You
may need to consult your card’s documentation or your IT professional for
more information.
2 Within the Video/Audio Standard tab, select the VGA Out device from the
Select Output Device drop-down list.
3 Set the video standard and rotation for the card.
4 Click the Update button to finalize the settings for the selected card.
5 Use the Add and Remove buttons to set the heads provided by the card.
InfoCaster and Network Manager consider each head to be an instance.
Each head can display separate InfoCasts, and heads can be combined
together to span InfoCasts across multiple monitors.
Note:
Any time you change the settings of a card, click the Update button
to finalize the changes.
6 If you want to be able to edit InfoCasts and control output locally on this
system, select the head you want to want to use for editing, and select the
Set This Head as Windows Desktop checkbox.