Harris InfoCaster R1000, Руководство по установке оборудования

Страница: 41 / 68

21 Chapter 2 | Installation and Setup
InfoCaster Rackmount Hardware Installation Manual
If you do not have the Catalyst Control Center you can also set up Edit &
Playback output using the Windows Properties dialogs. See
“Set Up Edit &
Playback Without Catalyst Control Center” on page 23 .
• If you have the Multi Head option, use this option when you want to
operate two players on a single system. Each player instance displays its
output on a separate monitor. With this configuration two InfoCasts can be
displayed at the same time.
Disable the Onboard VGA
If your computer motherboard has an onboard VGA there can be resource
conflicts with the ATI card. The onboard VGA must be disabled. Check the
documentation included with your computer to find out if the motherboard has
an onboard VGA, or ask your system administrator for assistance. Your system
administrator must disable the onboard VGA in the computer BIOS, and in
Windows XP.
Note:
After running any other video enabled application, you must reboot the
computer before running InfoCaster.
Configure Display
Settings
Follow these instructions to configure your display settings.
1 Connect and turn on the second monitor.
2 Right-click on the Windows desktop.
3 Select Properties to open the Display Properties dialog.
4 Switch to the Settings tab.
5 Click on the Advanced button. A display configuration dialog opens.
6 In the display configuration dialog, switch to the Catalyst Control Center
tab.