18
DVSD / DVSE6800
+
Installation and Operation Manual
Chapter 3: Operation
177
Forces channel to lock to a 177 Mb / s signal
Set the jumper on the pin that allows the reclocker to handle 177 Mb / s data only
• If the reclocking is successful, the 177 Mb / s LED will be green
• If the reclocking is not successful, the 177 Mb / s LED will be off and un-reclocked data
will be present at output
270
Forces channel to lock to a 270 Mb / s signal
Set the jumper on the pin that allows the reclocker to handle 270 Mb / s data only
• If the reclocking is successful, the 270 Mb / s LED will be green
• If the reclocking is not successful, the 270 Mb / s LED will be off and un-reclocked data
will be present at output
360
Forces channel to lock to a 360 Mb / s signal
Set the jumper on the pin that allows the reclocker to handle 360 Mb / s data only
• If the reclocking is successful, the 360 Mb / s LED will be green
• If the reclocking is not successful, the 360 Mb / s LED will be off and un-reclocked data
will be present at output
540
Forces channel to lock to a 540 Mb / s signal
Set the jumper on the pin that allows the reclocker to handle 540 Mb / s data only
• If the reclocking is successful, the 540 Mb / s LED will be green
• If the reclocking is not successful, the 540 Mb / s LED will be off and un-reclocked data
will be present at output
LO RANGE
Selects either 143 Mb / s or 19.4 Mb / s signal
• If the Reclock status LED indicator next to “LO” is green, then 19.4 Mb / s signal is
selected.
• If the Reclock status LED indicator next to “HI” is green, then 143 Mb / s signal is
selected.
See
for the location of the reclock status indicators.
Bypass
Forces channel to bypass the reclocker
Table 3-1.
P2
/
P3 Local Control Reclock Modes
(Continued)
Reclock Mode
Description
