![Harris 920 Series Скачать руководство пользователя страница 4](http://html2.mh-extra.com/html/harris/920-series/920-series_installation-and-operation-manual_4000471004.webp)
PREPARED FOR: AIRGAS
PROJECT: P&ID FOR SG 920
Date Created: 06/01/18
Revision Date: Rev: 0
"Copyright 2017. The Harris Product Group.
The drawings above, and copyrights thereto,
are the sole property of The Harris Products
Group. Any reproduction, distribution, derivative
works or creation of parts based theron without
the express written consent of The Harris
Products Group is expressly prohibited."
Please fax or email back upon approval,
or mark up specific changes and resubmit.
Fax to (800) 841-3738
Date Approved:
Approved By:
P.O.#
Customer:
Sign Upon Approval
ADDITIONAL INFO/ SPECS:
(800) 733-4043 PROMPT 2
PRESSURE INDICATOR
PRESSURE REDUCER VALVE
RELIEF VALVE
VALVE
CGA CONNECTION
PRESSURE GAUGE
P&ID LEGEND
CGA FITTING
C
CHECK VALVE
CV
VALVE
HV
FILTER
F
PI
PI
REGULATOR
PCV
FLEXIBLE PIGTAIL
DIAPHRAGM VALVE
PI
PI
PI2
PI
PI1
PI4
PI3
RIGHT BANK
INLET
LEFT BANK
INLET
OUTLET
ABBRV.
PCV1
PCV2
RIGHT BANK
0-3000 PSI
LEFT BANK
0-3000 PSI
TEST GUAGE
0-400 PSI
LINE PRESSURE
0-200 PSI
PI
REGULATOR
PRESSURE GUAGE
PCV
PI
DIAPHRAGM VALVE
Fig. 1 - PD&I Schematic Diagram
Alarm Systems
The changeover panels can have either a Harris or customer-supplied alarm system connected to them.
The Harris alarms are intrinsically safe devices and can be used with inert, oxidizer and flammable gases. The alarm box does not require
intrinsically safe barriers when being used for flammable gases or in hazardous/flammable environments.
When the customer supplies an alarm system, they must follow not only the necessary & applicable fire codes, they should ensure all equipment
and tubing is properly cleaned to prevent the introduction of contaminants into the gas stream.
Harris Equipment Warranty Policy
Harris warrants that manifold products sold in non-corrosive gas service are free from manufacturing defects in material and workmanship under
normal use for a period of 1 year from the date of purchase.
Harris warrants “corrosive service” equipment for a period of 90 days from the date of shipment.
Within said warranty period, Harris agrees, at its discretion, to replace or repair free of charge at its factory in Gainesville, GA any product or part
that is found to be defective in workmanship or materials.
Harris will not pay for or warranty repairs made by anyone other than personnel authorized by Harris to make such repairs.
HARRIS SHALL NOT
BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, TO THE EXTENT PERMITTED BY LAW. EXCEPT AS OTHERWISE
PROVIDED BY LAW, THIS EXPRESS WARRANTY SHALL BE THE EXCLUSIVE WARRANTY AND SHALL BE IN LIEU OF ALL IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE AND MERCHATABILITY.
The warranty and
remedies provided in this express warranty shall not apply to any product that has been damaged by accident, abuse or misuse, or been modified
or changed in any way except by personnel authorized by Harris.
THE REMEDIES STATED HEREIN SHALL BE EXCLUSIVE REMEDIES OF THE
INITIAL USER UNDER THE EXPRESS WARRANTY CONTAINED HEREIN AND UNDER ANY OTHER WARRANTIES EXPRESSED OR IMPLIED
REQUIRED AS BY LAW.
WARRANTY ADDENDUM FOR CHANGEOVER PANELS: ANY ATTEMPT TO ADJUST THE SET POINT OF THE CHANGEOVER SHALL VOID ANY
AND ALL WARRANTY PROVISIONS OFFERED BY HARRIS.