Harrington Network Plus HS-3030 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 65

Harrington Network Plus HS-3030 Скачать руководство пользователя страница 21

HS-3030 Programming Manual

15

2.5 Panel Window

The Panel Window (see

Figure 8

) allows editing of all panel level options. It defines the hardware

mounted in the panel and the functionality of the programmable outputs. The programming
controls provided will change to reflect the capabilities of the currently selected panel. The Title
Bar will describe the currently highlighted panel or annunciator.
The Panel Window has the
following push buttons
along the right side:

•

Exit:

Close the

Panel Window and
return to the
System Window.

•

Add Panel:

Add

another panel to
the system. A
dialog box will be
displayed. The
default options are
to use the next
available panel ID
and to select an
HS-3030 panel.
You will also be
asked if you want
NP to automatically set the Next ID. If allowed, this panel will have the next higher
numbered panel as its Next ID and the panel with the next lower number will be set to
have this panel as its Next ID. If the new panel is the highest numbered panel, it will use
the lowest numbered panel as its Next ID.

•

Delete:

Remove the current panel from the system. All programming for that panel will be

lost. Any of the panel's outputs that are referenced will become invalid and will be
removed by the next verify.

•

Input Circuits:

Display the Circuits Window. See section 2.6

•

Internal Circuits:

Display the Internal Circuit Window. See section 2.7.

•

More Info:

This displays a dialog box listing basic information about the panel including

the date the database was last downloaded into a panel, the number of times downloaded,
etc.

•

Change Type:

Displays a dialog box to change the type of the current panel. This makes

it easier to correct mistakes when creating a database and to update the database if a
panel type is changed in the field. Only certain type changes are allowed.

•

Change ID:

Displays a dialog box for changing the ID of the current panel. NP will

automatically change all references to use the new ID. This process could take a long time
for a large database. A gauge will be displayed to show the progress of the change.

•

Map:

Displays and/or updates the Map Window. See section 2.8

Map Window

of the

Network Plus User Guide

.

•

Verify List:

Displays the Verify List. If there is no Verify List, you will be given the option to

perform a verification. See section 2.6.5

Verify

of the Network Plus

User Guide

.

Note:

This can have far reaching effects on a system. Any information that is no longer valid with the

new panel type will be lost

Figure 8: Panel Window

«
...
19
20
21
22
23
...
»

Содержание Network Plus HS-3030


































































Отзывы:

Нет отзывов