HARO SKWAD, Руководство пользователя

Страница: 35 / 36

33. Use bolts on side of light to adjust and
tighten light angle. Ensure all hardware
is tightened properly according to the
values in “Tools and recommended
torque values” on page 5 (see Fig 14).
34. Remove pedals from accessory box and
install. Be sure to note the L and R on
each pedal and install accordingly. Use
clockwise pattern to tighten drive side
and counterclockwise pattern to tighten
non-drive side (See Fig 15).
35. *Optional Foot peg installation –
Remove foot peg hardware from the
frame’s chainstay
36. Place allen bolts in foot pegs and install
on frame (See Fig 16). Ensure all hard-
ware is tightened properly according to
the values in “Tools and recommended
torque values” on page 5.
37. Install battery into frame by sliding the
front of the battery in the frame first,
snapping the back of the battery in
place (See Fig 17).
38. Ensure headset is tight by loosening
the stems pinch bolt, tighten up the
top cap allen bolt, and then tighten the
stem pinch bolts. Ensure all hardware is
tightened properly according to the val-
ues in “Tools and recommended torque
values” on page 5.
Fig 14 Fig 16
Fig 17
35
Fig 15
WARNING : Disc brakes should come adjusted from the factory. In the event they
are not adjusted properly see “Adjusting for comfort and safety” on page 6 and
“Ensure all hardware is tightened properly” on page 7. If you are not sure you
have the experience, skills, and tools to correctly perform adjustment steps in the
manual, consult a local, certified, reputable bike mechanic.