Harmopool Harmo PAC Series, Инструкция по эксплуатации

Страница: 12 / 19

12
Press "M"
again "8" "1 " Press “SET” to enter Mode setting, press to alter. Press “SET” again to confirm.
Press "M" again "9" "0 " Press “SET” to enter water pump setting, press to alter. Press “SET” again
to confirm. Press "M" again "A" "40 " Press “SET” to enter return water temp. setting, press to
alter. Press “SET” again to confirm.
Press "M" again "b" "5 " Press “SET” to enter Overheat protection(heating mode) setting, press to
alter.
Press “SET” again to confirm.
Press "M" again "C" "35 " Press “SET” to enter Electronic expansion valve setting, press to alter.
Press “SET” again to confirm.
Press "M" again "D" "5 " Press “SET” to enter Overheat protection(cooling mode) setting, press to
alter.
Press “SET” again to confirm.
Press "M" again "E" "40 " Press “SET” to enter Max. temp. setting, press to alter. Press “SET” again to
confirm.
Press "M" again "F" "2 " Press “SET” to enter Split temp. setting, press to alter. Press “SET” again to
confirm.
*Delta T is 2°C standard and can be set by the parameter F.
Press "M" again "G" "- 10 " Press “SET” to enter Ambient temp. protection setting, press to alter.
Press “SET” again to confirm.
Clock settings
Under running or standby status. Press “SET” for 5 seconds, get a sound “B”, press to alter hour, press
“SET” again to alter minute. Press “SET” again to confirm.
Timer settings
Under running or standby status, Press “ ” for 5 seconds, get a sound “B”, press to alter hour of timer
ON, Press “ ”again to alter minute of timer ON. Press “ ”again to alter timer OFF.