Harmony COMMANDER, Инструкция по эксплуатации, Страница: 39 / 102

38
iNstALLAtioN - Booster witH BAckrest
dUe To VArYING ANGLeS oF VeHICLe SeAT BeLT
reTrACTorS, eXCeSS SLACK IN THe VeHICLe BeLT
SYSTeM MIGHT NoT Be reMoVed AUToMATICALLY.
Once the lap and shoulder portions of the seat belt
are properly positioned and the buckle is attached,
Feed ANY reMAINING SLACK oF THe SeAT BeLT
MANUALLY BACK INTo THe reTrACTor To TIGHTeN
THe WHoLe SYSTeM.
WArNING!
!
1. Place the booster seat flush against a forward-facing
vehicle seat. The vehicle seat MUST be equipped with
a 3-point lap-and-shoulder belt. Booster must be
level, stable and not rock side-to-side (see “Vehicle
seating positions”).
2. Place child in the booster seat with child’s back flat
against the back of the booster seat.
3. Adjust headrest height so that the shoulder belt is
eVeN
or
JUST ABoVe
the top of the child’s shoulders.
4. Thread shoulder belt portion of
the 3-point lap-and-shoulder belt
system through the
shoulder belt guide
❶ and ensure that
shoulder belt lies across
child’s shoulder and
chest, and NoT across
child’s face or neck.
5. Thread both sides of the lap belt under BoTH
armrests. Thread the lower end of the shoulder
belt under the armrest on the buckle side ❷ .
eNSUre that the belt is snug across the child’s hips.
It is important to ensure that any lap strap is worn
low down, so that the pelvis is firmly engaged,
❷
❶
❷