Harmony COMMANDER, Инструкция по эксплуатации

Страница: 41 / 102

40
worn low down, so that the pelvis is firmly engaged,
just touching their thighs and is NoT across their
stomach.
4. Buckle the vehicle seat belt into place and ensure it is
secure by gently pulling on it.
! BoTH SIdeS oF THe LAP BeLT MUST PASS UNder
BoTH ArMreSTS, ANd THe LoWer eNd oF THe
SHoULder BeLT MUST PASS UNder THe ArMreST
oN THe BUCKLe SIde.
! Any straps holding the restraint to the vehicle should
be tight, any straps restraining the child should be
adjusted to the child’s body, and all straps should not
be twisted.
! NeVer USe A VeHICLe LAP-oNLY BeLT WHeN USING
THIS BooSTer SeAT.
! WArNING : To avoid possible entanglement hazard,
see “Entanglement with vehicle seat belt”.
! THe VeHICLe’S SHoULder BeLT MUST LIe ACroSS
THe CHILd’S SHoULder ANd LAY ACroSS THe
CHeST – NoT THe FACe or NeCK . If the belt does not
lie properly across the child’s shoulder and chest, the
red shoulder belt safety guide (“Parts list - T”) MUST be
used to ensure proper placement (see “Using shoulder
belt safety guide”).
To INSTALL:
1. Insert loop end of strap
around bar on rear of seat
❶ on side
oPPoSITe
to
the vehicle retractor.
2. Pass the red clip and strap
through the loop end ❷
and pull strap tight ❸.
It is recommended to store the unused
shoulder belt safety guide along with any
other parts from the booster seat for
future use.
INSTALLING/reMoVING SHoULder BeLT
SAFeTY GUIde
❶
❷
❸