| www.harmar.com | 800-833-0478
26
SECTION 2 : INSTALLER
Installation
6. Carefully fold the enclosure lid back over enclosure
to avoid trapping any wires
. Use supplied screws (x2)
to fasten the lid to the bottom enclosure.
[Figure 26-1]
7. If customer prefers,
fasten enclosure to chosen
location using self-drilling screws provided.
[Figure 26-2]
Do NOT over-torque these screws.
8. Plug the hand control into the receptacle in the
enclosure.
Turn the power switch to the ‘ON’ position.
[Figure 26-3]
Test the lift’s motion against the button’s on the
hand control.
[Figure 26-4]
Figure 26-1
Figure 26-2
Figure 26-4
Figure 26-3
