AL815CC, AL825, AL825CC, AL835 Hybrid Installation & Owner's Manual 2017
19
TEC00037 2016FEB20 P/N: 630-00053 Rev A
SECTION 2 : INSTALLER
Installation
Figure 19-3
Figure 19-4
Wherever possible incorporate the frame rails of the
truck. This is a requirement when lifting heavier chairs
and scooters.
[Figure 19-1]
FRAM
E
FRAME
FRAME
As a last resort, if the truck frame cannot be used in
the mounting, adding these two anchor brackets will
help stabilize the lift and help prevent the truck bed
from tearing.
[Figure 19-2]
3/8-16 x 3.50
Hex Head
Cap Screw
3/8-16 x 3.50
Hex Head
Cap Screw
Installation
Washer
Installation
Washer
3/8 Split
Loc Washer
3/8-16
Hex nut
3/8-16
Hex nut
TRU
CK
BED
FLOOR
/
FRAM
E
Anchor
Bracket
Anchor
Bracket
Temporary
3/8-16
HEX NUT
3/8 Split
Loc Washer
(x3)
3/8-16 x 2-3/4"L
Socket Head
Cap Screw (x3)
Remove
5. Remove temporary hex nut.
Attach Power Base
Assembly as shown. Tighten bolts to approx. 30 ft. lbs.
6. Finish assembly
with one more loc washer and hex
nut in corner as shown. Tighten to approx. 30 ft. lbs.
Cut off excess all thread if desired.
3/8 Split
Loc Washer
3/8-16
Hex Nut
Figure 19-1
Figure 19-2
