AL-055 OPERATION
PO
ST
ARM A
SSEMBL
Y
TO
M
OTO
R
TO VEHICLE
HARNESS
ROTATE ARM OUT
OF VEHICLE
INSPECT LIFTING STRAP
BEFORE EACH USE
INSPECT LIFTING STRAP
BEFORE EACH USE
CONNEC
T POWER
TO
LIFTING MOT
OR
OPEN TRUNK OR
CARGO DOOR
PLACE POST
INTO BASE
PLACE ARM
ASSEMBLY
ONTO POST
PARK CHAIR
CLOSE TO
VEHICLE
LOWER
STRAP
TO CHAIR’S
HEIGHT
KEEP HANDS AND FEET FROM UNDER THE SCOOTER
OR POWER CHAIR AS IT IS BEING LIFTED
FOLD SEAT
BACK DOWN /
TAKE SEAT OFF
ATTACH
DOCKING DEVICE
OR
ATTACH LIFTING
HOOK TO DOCKING
DEVICE
RAISE CHAIR
ABOVE BUMPER
MANUALLY ROTATE
ARM INTO VEHICLE
ENSURE THE LIFTING STRAP IS SECURE AND THAT IT
POINTS STRAIGHT DOWN. FAILURE TO DO SO COULD
RESULT IN THE SCOOTER OR CHAIR SWINGING
CAUSING DAMAGE TO OPERATOR OR VEHICLE
STOP LIFTING BEFORE THE STRAP HOOK CONTACTS THE STRAP ROLLER MOUNTED ON THE
LIFTING ARM. CONTACT WILL DAMAGE THE LIFT. A PROPERLY ADJUSTED LIFT WILL AVOID THIS
ELIMINATE EXCESS STRAP BY PRESSING THE “UP” BUTTON
UNTIL THE HOOK IS ABOUT 1 INCH FROM THE TOP OF THE LIFTING
ARM, MAKING DIS-ASSEMBLY EASIER.
IF PREPARATIONS ARE NEEDED TO SECURE THE SCOOTER OR CHAIR
FOR TRANSPORT SUCH AS PARKING BRAKES OR WHEEL CHOCKS,
THE DEALER SHOULD INSTRUCT OPERATORS ON HOW.
DUE TO THE WIDE VARIETY OF SCOOTERS, POWER CHAIRS, AND VEHICLES,
YOUR DEALER MAY OFFER A DIFFERENT METHOD FOR LOADING AND UNLOADING
YOUR MOBILITY DEVICE. PLEASE FOLLOW THE GUIDELINES THEY HAVE OFFERED.
UNLOADING IS THE REVERSE OF LOADING.
REMOVE ARM & POST ASSEMBLIES
AND STORE INSIDE TRUNK OR
CARGO AREA
CLOS
E TRUNK / CARGO DOOR
DISC
ONNEC
T POWER
TO
LIFTING MO
TO
R
LOWER CHAIR
INTO VEHICLE
REMOVE HOOK
FROM DOCKING
DEVICE
9
