Harman Soundcraft ViSi, Руководство пользователя

Страница: 6 / 24

6
Soundcraft ViSi Remote User Guide 0614
Setting IP Addresses
Before ViSi Remote can be used on-line, a network connection must be established between
the iPad and console. The simplest solution is to set the router as a DHCP server and set
the consoles and iPad to use DHCP addressing.
Refer to the user guide of your console for details on how to adjust the console’s IP address
settings.
Console HiQnet connection point
The HiQnet port is located on the rear of Si Expression, Performer and Compact consoles as
a standard Ethernet input. There is a green LINK LED that indicates an electrical connection
is established and a DATA LED that indicates data flow.
On Vi1 and Vi3000, the HiQnet port is located on the rear of the console as an Ethercon
connection. There is also a green LED that indicates data flow.
Vi2/4/6 each have a HiQnet port on the rear of the console Surface. These are secure
Ethercon connectors and have a green LED that indicates Data Flow.
Router Setup
To create a working environment for ViSi Remote, you will need to carry out some initial
setup of your network router.
• IP addressing
Within the router’s control panel, there will be options to set IP addresses using
DHCP or manual addressing. Depending on your requirements, setting the router
to DHCP is recommended.
Please refer to the user guide of your chosen router for instructions on how to access
this control panel.
• Enabling UDP
In order to utilise ViSi Remote’s global and per channel metering, your chosen router
must have UDP enabled within the control panel.
Please refer to the user guide of your chosen router for instructions on how to
enable UDP.