Harman® • PF-120 Owner’s Manual_R3 • 2014 -___ • 10/14
9
3-90-08120c
E. General Operating Information
1. Control Calls For Heat
The appliance is like most modern furnaces; when the control
calls for heat, your appliance will
automatically light and
deliver heat.
When the room is up to temperature and the control is
satisfied, the appliance will shut down.
2. Fan Limit Control
This appliance is equipped with a Fan Limit Control switch
that operates the fan as the plenum temperature rises and
falls. The control works independent from the control board.
Figure 3.1
Fire Hazard.
Keep combustible materials, gasoline and
other flammable vapors and liquids clear of
appliance.
•
DO NOT store flammable materials in the appliance’s
vicinity.
•
NEVER USE GASOLINE, GASOLINE-TYPE LANTERN
FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR
SIMILAR LIQUIDS TO START OR “FRESHEN UP” A FIRE
IN THIS HEATER. KEEP ALL SUCH LIQUIDS wELL AwAY
FROM THE HEATER wHILE IT IS IN USE.
•
DO NOT BURN GARBAGE, GASOLINE, DRAIN OIL OR
OTHER FLAMMABLE MATERIALS.
•
DO NOT USE CHEMICALS OR FLUIDS TO START THE
FIRE.
• Combustible materials may ignite.
• Inspect and clean flues and chimney regularly
WARNING
!
F. Main Operating Control
The control can be covered, or uncovered as shown in Figure
3.1. There are tabs provided on the cover for each position.
Simply move the cover to the desired position by placing the
tabs of the cover in the proper slots.
HOT wHILE IN OPERATION. DO NOT TOUCH
DURING OPERATION. KEEP CHILDREN, CLOTHING,
FURNITURE, AND OTHER COMBUSTIBLE MATERIAL
OUT OF THE INSTALLATION CLEARANCE AREA.
CAUTION
!
DO NOT STORE FUEL OR OTHER COMBUSTIBLE
MATERIAL wITHIN THE MARKED INSTALLATION
CLEARANCES.
WARNING
!
DO NOT OPERATE wITH FUEL-LOADING OR ASH-
REMOVAL DOORS OPEN.
