Harman Martin MAC Aura XIP Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 94

background image

4

MAC Aura XIP Safety and Installation Manual

Safety Information

The following symbols are used to identify important safety information on the product and in this document:

Warning! The MAC Aura XIP from Martin® contains components that are accessible and live at high
voltage while the fixture is connected to power. These components remain under tension for up to
five minutes after power is disconnected.

Only qualified technicians are permitted to open the fixture. Users may carry out external cleaning
and clean the air filter as described in this manual, following the warnings and instructions
provided, but any service operation not described in this manual or in the fixture’s User Guide must
be referred to an authorized Martin service technician.

Warning! Risk Group 2 product (see “Protection from eye injury” on page 6). This product produces
intense light output that may be hazardous if suitable precautions are not taken. Do not view the
light output with optical instruments or any device that may concentrate the beam.

This product presents risks of severe injury or death due to fire and burn hazards, electric shock and falls if
the safety precautions in this manual are not followed.

Read this manual

before installing, powering or servicing the fixture. Follow the safety precautions and

observe all warnings in this manual, in the MAC Aura XIP User Guide and printed on the fixture.

The latest versions of this Safety and Installation Manual and the MAC Aura XIP User Guide are available
for download from the MAC Aura XIP areas of the Martin website at www.martin.com. Before you install,
operate or service the fixture, check the Martin website and make sure that you have the latest user
documentation for the fixture. Document revisions are indicated at the bottom of page 2.

This product is for professional use only. It is not for household use. Respect all locally applicable laws,
codes and regulations when installing, powering, operating or servicing the fixture.

Install, operate and service Martin products and accessories only as directed in their user documentation,
or you may create a safety hazard or cause damage that is not covered by product warranties.

The latest software, manuals and other documentation for all Martin products are available for download at
www.martin.com

Technical Support

If you have questions about how to install or operate the fixture safely, please contact Harman Professional
Technical support:

• For technical support in North America, please contact: [email protected]

Phone: (844) 776-4899

• For technical support outside North America, please contact your national distributor.

WARNING!

Read the safety precautions in this section before

installing, powering, operating or servicing this

product.

DANGER!

Safety hazard.

Risk of severe

injury or death.

DANGER!

Hazardous

voltage. Risk of
lethal or severe

electric shock.

WARNING!

Fire hazard.

WARNING!

Burn hazard. Hot

surface. Do not

touch.

WARNING!

Intense light

emission.

WARNING! Refer

to user

documentation.

«
...
56
57
58
59
60
...
»

Содержание Martin MAC Aura XIP































































































Отзывы:

Нет отзывов

Похожие инструкции для Martin MAC Aura XIP

Бренд: Sammode Страницы: 4

Бренд: B-K lighting Страницы: 4

DreamLED RFC-40

Бренд: TE-Group Страницы: 2

Бренд: Nemalux Страницы: 12

COMBOLIGHT LV3005IS

Бренд: Cooper Lighting Страницы: 1

Бренд: NEO Страницы: 52

Бренд: DOMUS LINE Страницы: 18

Бренд: Pro-4 Tactical Страницы: 4

Бренд: SImx Страницы: 9

ELAR TRI PAR IP

Бренд: Elation Страницы: 8

Бренд: IKEA Страницы: 8

Бренд: PROF Страницы: 18

Бренд: Evolite Страницы: 27

Бренд: Beghelli Страницы: 2

Бренд: Chauvet Страницы: 16

Бренд: Chauvet Страницы: 22

Бренд: CAPERE Страницы: 16

Бренд: RAB Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды