Harman Martin Exterior 400 Series, Руководство пользователя

Страница: 25 / 40

Operation 25
client
fixture has (4, for example) in whole numbers (no decimal places). In this example 5 divided by 4
results in 1, with 1 remainder. This remainder will be the number of the scene that the
client
fixture starts
- scene 1. Generally though, when a
Client
fixture reaches its own last scene before the Master fixture, a
“go to scene x x ” message will result in the first scene being played.
6. If a
client
has more scenes than the master calls, the last scenes in the
client
will never be executed, as
is the case with scene S4 in the following example.
7.
In synchronized operation, the wait time is determined by the master. Every
client
fixture fades and waits
at its own rate and then remains in the “wait” state until it receives a “start scene xx” command from the
master.
8.
A
client
fixture will not listen for the next message from the master fixture before it has finished its current
scene. This may result in a
client
skipping a scene if the
client
has a longer scene time than the master.
Note that in the following example, the scenes in the
client
run out of their programmed sequence
because scenes 0 and 2 on the
client
are longer than the corresponding scenes on the master.
F=fade, W=wait Timeline =>
M0
M1 M2 M3
Programmed in Master F W F W F W F W
S0 S1 S2 S3 S4
Programmed in
Client
F W F W F W F W F W
Result M0 M1 M2 M3
F W F W F W F W
S0 S1 S2 S3
F W F W F W -- -- F W
M=master, S=
client
F=fade, W=wait Time >
Programmed M0 M1 M2
Master F W F W F W
S0 S1 S2
Client
F W F W F W
Result M0 M1 M2 M0 M1
Master F W F W F W F W F W
S0 S2 S1
Client
F W F W .. .. F W .. ..