Harman Martin Exterior 400 Series, Руководство пользователя

Страница: 23 / 40

Operation 23
3. Select a fade time and a wait time for the scene.
Scene management
Once you have specified values for the effects and fade and wait times for the scene, you can store and
manage scenes using the commands available at the bottom of the
Stand-alone program window:
When the program is run by applying the Run program command, scenes execute in a continuous,
ascending loop.
Synchronizing stand-alone operation
If you are running multiple fixtures on a data link, you can synchronize action so that all fixtures start their
programmed shows and start fading to the next scene at the same time.
Setting master and
client
fixtures
In synchronized operation, one fixture is set as the master and the others are set as
clients
. Each fixture
must be programmed with its own show. When the master fades to the next scene or starts its show from
the beginning again, it tells each
client
fixture to fade to its next scene or start its show again. In other
words, each
client
fixture will run its show repeatedly in a cycle, changing scene when prompted to by the
master, until the master finishes its own show and signals that all fixtures should start from the first scene
once again.
Store scene Save settings in the current scene.
Add scene Save settings in a new scene at the end of the current sequence of
scenes.
Insert scene Save settings in a new scene before the current scene. Tip: Think of
the Add and Insert commands as Save commands, to be used as the
last step after programming all effects.
Delete scene Remove the current scene from memory. Scenes after the deleted
scene are renumbered.
Next scene Step to the next scene.
Previous
scene
Step to the previous scene.
Delete all Remove all scenes from the fixture’s memory.
Run program Run the scenes in the programmed light show.
Figure 19: Stand-alone programming window