manualshive.com logo in svg

Harman Martin Exterior 400 Series, Руководство пользователя

Поделиться
Скачать
Harman Martin Exterior 400 Series Скачать руководство пользователя страница 17

Fixture setup

 17

Fixture setup

The Martin MUM (Multi-Utility Manager) application allows you to program and configure Martin Exterior 
400 Range fixtures from a laptop PC and features an intuitive GUI (graphic user interface).

Using MUM, you can connect to and set up one fixture at a time. Refer to the MUM user manual for 
instructions on installing and starting the MUM application. 

Connecting a PC with MUM

To connect a PC with MUM to an Exterior 400 Range fixture:

1. Obtain the MUM application, a Martin DABS1 adaptor and interface cables. These are available as a set, 

P/N 90758090, from Martin.

2. Connect the DABS1 adaptor to your PC using the USB cable.

3. Connect the DABS1 adaptor to the fixture using an XLR connector connected to the data link. Note that 

you may only connect to one fixture at a time.

4. Apply power to the fixture and start the MUM application. The application will automatically detect the 

fixture if it is powered on and correctly connected. It will also retrieve and display information and current 
settings from the fixture.

Figure 14: Connecting to a PC with MUM

Содержание Martin Exterior 400 Series









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды