Harman Martin ERA 500 Hybrid IP, Руководство пользователя

Страница: 22 / 28

22
ERA 500 Hybrid IP User Guide
Control panel menus
ERA 500 Hybrid IP firmware version 1.0.0.
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes
DMX ADDRESS 1 – XXX
DMX address (default address = 1 ). The
DMX address range is limited so that the
fixture will always have enough DMX
channels within the 512 available.
PERSONALITY
PAN INVERT OFF /ON Inverse DMX pan control: right
→
left
TILT INVERT OFF /ON Inverse DMX tilt control: down
→
up
PAN/TILT SPEED
FAST Optimize pan/tilt movement for speed
SMOOTH
Optimize pan/tilt movement for
smoothness
AUTO LAMP ON
OFF Automatic lamp strike disabled
ON
Lamp strikes automatically 60 seconds
after fixture is powered on
DMX
Lamp strikes automatically 60 seconds
after DMX signal is received
DMX LAMP OFF
ON
Lamp can be powered off via DMX
(using command on Fixture settings
channel)
OFF Lamp cannot be powered off via DMX
NO DATA MODE
BLACKOUT If data signal stops, fixture blacks out
HOLD
If data signal stops, fixture holds last
received data on all channels (holds
current scene)
COOLING MODE
REGULATED FANS
Fan speed optimized for lowest noise:
temperature-controlled by regulating
fan speed
FULL Fans run at constant full speed
DMX RESET
ON
Fixture can be reset via DMX (using
command on Fixture settings channel)
OFF Fixture cannot be reset via DMX
EFFECT
SHORTCUT
ON
Effects take shortest route during
changes, crossing open positions if
necessary
OFF
Effects avoid crossing open positions
during changes
DISPLAY
DISPLAY SLEEP
ON Control panel display constantly on
2 MINUTES
Control panel display goes into sleep
mode after 2 / 5 /10 minutes
5 MINUTES
10 MINUTES
DISPLAY
ROTATION
AUTOMATIC
Control panel display rotates 180°
automatically if fixture is installed with the
head below the base
NORMAL Control panel display orientation normal
ROTATE 180 Control panel display rotated 180°
DISPLAY
INTENSITY
10
...
100
Set control panel display intensity in %
(default =
100 )
TEMPERATURE
UNIT
°C / °F
All temperature readouts in Celsius /
Fahrenheit
ERROR MODE
NORMAL
Enable error messages and warnings in
display
SILENT
Disable error messages and warnings in
display
Table 2: Control menus