Harman Martin ERA 500 Hybrid IP, Руководство пользователя

Страница: 10 / 28

10
ERA 500 Hybrid IP User Guide
Shortcut menu
Holding the MENU button pressed in for two seconds brings up the Shortcuts menu in the display. The
Shortcuts menu contains the following items:
• RESET ALL – Resets the entire fixture.
• ROTATE DISPLAY – Rotates the display 180°.
Key combination functions
Holding certain combinations of keys pressed in together gives quick access to specific functions as follows:
• MENU + UP = RESET ALL – Resets the entire fixture
• UP + DOWN rotates the control panel display through 180°
• MENU + ENTER = SERVICE MODE – Freezes pan and tilt but the rest of the fixture responds normally to
the control panel. A SERV message appears in the display. Pan and tilt remain frozen until the next power
off/power on cycle.
Important! You must use the MENU + ENTER key combination
immediately after
applying power. Push
the power input cable connector into the input socket and twist clockwise to lock the connector and apply
power to the fixture, then
immediately
press the MENU and ENTER buttons and hold them pressed in for
a few seconds or until SERV appears in the display.
Settings stored permanently
The following settings are stored permanently in the fixture memory and are not affected by powering the
ERA 500 Hybrid IP off and on or by updating the fixture software:
• DMX address
• All personality settings (pan/tilt, cooling mode, display settings etc.)
• Resettable counters
• Service settings
• Factory-set calibration data