Decoder Configuration Options
N2412A/N2422A User Manual
48
Decoder Setup Section
The
Decoder Setup
section of the
Settings
page is shown in
Figure 44
. Options are described in
Table 19
.
FIG. 44
Decoder Setup Section
TABLE 19
Settings Page: Decoder Setup Section
Option
Description
Notes
Device Name
Enter a user-friendly name for the unit.
More descriptive names in this field help you organize
and manage the N-Series system efficiently. Names
based on the unit’s location and function are very
useful. Some good examples are
Lobby-Left-VGA
(for
left side of lobby, VGA input) or
CR201-HDMI
(for
Conference Room 201, HDMI input). Keep in mind the
matrices are organized alphanumerically.
Stream
View/edit the current receiving stream number.
To better understand this setting, think of Decoders
dialing up channels on a cable box, rather than a
traditional AV matrix. Each decoder can dial in a
different active channel.
Audio Stream
View/edit the current audio receive stream number.
This stream number only applies if
Audio Follows
Video
is disabled (see below).
Audio Follows Video
Enable to force the
Audio Stream t
o the same as the
video stream.
Enabled by default. Disable if you want audio to come
in on a different stream.
Scaler
Enable to scale outgoing content to a fixed resolution or
to use the
Crop/Pan/Zoom
functions.
Output Mode
Select the output resolution of the video to be
transmitted to the video output device (e.g., LCD). The
Scaler
check box must be enabled for this to be
applicable.
Live/Local
Select live video or locally stored images for
transmission to the video output device (e.g., LCD).
When video is not available, it automatically goes into
local mode.
When video is not available, the most recently played
local playlist is displayed.
