Encoder Configuration Options
N2412A/N2422A User Manual
43
TABLE 16
EDID Page Options (Cont.)
Option
Description
Set EDID to Pass-thru
Set the EDID to the pass-thru EDID of the connected display to
HDMI OUT
.
Reset EDID
For
Digital
, choose a standard EDID from the drop-down menu and click
Reset EDID
to apply. For
Analog
, no
selection is necessary.
Logs Page
Click the
Logs
link at the top of any of the main web pages to access the page shown in
Figure 38
. The
Logs
page displays a
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser’s IP address and gives you
options to
Refresh
and
Reset Logs
. When in need of assistance from tech support, you can use the Debug Log section to capture
useful troubleshooting information. Simply click the Start Debug Log button, wait at least one minute, and click the End Debug Log
button to create the file. You can then download and send it to AMX tech support.
FIG. 38
Logs Page
NOTE:
For security reasons, only use the Enable Maintenance Mode if instructed by AMX Technical Support. This selection only
appears in the secure version of the website (i.e., https).
