Programming
58
Modero G4 Touch Panels - Configuration & Programming Manual
Button Commands
^ANI
Run a button animation (in 1/10 second).
•
Syntax
:
"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
•
Variables
:
variable text address range = 1 - 4000.
start state = Beginning of button state (0= current state).
end state = End of button state.
time = In 1/10 second intervals.
•
Example
:
SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
Runs a button animation at text range 500 from state 1 to state 25 for 10 second.
^APF
Add page flip action to a button if it does not already exist.
Syntax
:
"'^APF-<vt addr range>,<page flip action>,<page name>'"
Variables
:
variable text address range = 1 - 4000.
page flip action =
Stan[dardPage] - Flip to standard page
StanAni[mated] - Flip to standard page using an animated transition (3 extra parameters)
Prev[iousPage] - Flip to previous page
Show[Popup] - Show Popup page
Hide[Popup] - Hide Popup page
Togg[lePopup] - Toggle popup state
ClearG[roup] - Clear popup page group from all pages
ClearP[age] - Clear all popup pages from a page with the specified page name
ClearA[ll] - Clear all popup pages from all pages
page name = 1 - 50 ASCII characters.
animation, along with available origin values =
Fade Center: Center
Slide: Top, Left, Right (default), Bottom
SlideBounce: Top, Left, Right (default), Bottom
cntrDrFade: Top, Left, Right (default), Bottom
doorFade: Top, Left, Right (default), Bottom
blkGlass: Left, Right (default)
pgCurl: LL, UL, LR (default), UR
(The following transitions are new in Modero X Series panels):
zoomIn: Center
zoomOut: Center
implode: Center
explode: Center
spinIn: Center
spinOut: Center
waves: Center
flipCard: Top, Left, Right (default), Bottom
slats: Top, Left, Right (default), Bottom
squish: Top, Left, Right (default), Bottom
tumble: LL, UL, LR (default), UR
wipe: Top, Left, Right (default), Bottom, LL, UL, LR, UR
time = transition time in tenths of a second (from 3 to 30 with 15 being the default)
Example
:
SEND COMMAND Panel,"'^APF-400,Stan,Main Page'"
Assigns a button to a standard page flip with page name 'Main Page'.
SEND COMMAND Panle,"'^APF-400,StanAni,Main Page,Slide,Left,10'"
^BAT
Append non-unicode text.
•
Syntax
:
"'^BAT-<vt addr range>,<button states range>,<new text>'"
•
Variables
:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
new text = 1 - 50 ASCII characters.
•
Example
:
SEND_COMMAND Panel,"'^BAT-520,1,Enter City'"
Appends the text 'Enter City' to the button’s OFF state.
