Harman AMX MXT/D-2000XL-PAN Скачать руководство пользователя страница 41

Страница: 41 / 115

Settings Pages

Modero G4 Touch Panels - Configuration & Programming Manual

Installing Previous Firmware

In certain circumstances, it may be necessary to revert to a previously installed version of the touch panel firmware.To reset the

touch panel to its previously installed firmware via the

Settings

pages:

From the

Install Firmware

page, select the

Previous

field.

A System Message window appears, asking “Are you sure you want to install the following firmware?”, with the previous

firmware version listed below (FIG. 55).

Within five seconds, the

Yes

button will be enabled. At that time, select

Yes

to install the previous firmware version and

return to the

Install Firmware

page.

If you choose

Yes

, the touch panel will reboot and restart with the previously installed firmware.

Installing New Firmware From An External USB Stick

Va the Settings Pages

Download the latest Modero G4 touch panel firmware from

www.amx.com

and save it to a USB stick.

NOTE:

The firmware must be saved in a folder in the USB stick directory, corresponding with the touch panel model, in order to

be recognized by the touch panel. For instance, firmware for an MST-431 must be saved in a folder named “mst-431” to be

recognized by the panel. The folder name is not case sensitive.

Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to access the USB

ports if a USB extension was not already installed.

NOTE:

In the case of the MSD-431-L, connecting a USB stick to the device will require the use of a USB OTG adapter.

From the

Install Firmware

page, select the

New

field.

A System Message window appears, asking “Are you sure you wish to install the following firmware?”. The option to choose

Yes

will be enabled after five seconds. Press

Yes

to load the firmware listed, and

to return to the

Firmware Installation

popup window.

The device will now upload the new firmware after prompting you to remove the USB stick. It will then automatically reboot.

Via External USB Stick

Before starting, download the firmware .kit file to a USB stick and connect the USB stick to the touch panel’s USB A port.

Reboot the touch panel. When the touch panel restarts, the device will detect the firmware upgrade and display a screen

requesting that you touch the screen to initiate an update. If you do not touch the screen within three seconds, the firmware

update will not be initiated and the panel will boot up normally (FIG. 56).

After pressing the screen to initiate the update, a new screen appears, informing you that the upgrade is in progress (FIG. 57).

FIG. 55

Install Previous Firmware system message

FIG. 56

Update initiation screen

Содержание AMX MXT/D-2000XL-PAN




















































































































Результаты поиска

Содержание AMX MXT/D-2000XL-PAN

Отзывы:

Harman AMX MXT/D-2000XL-PAN, Руководство по программированию, Страница: 41 / 115

Результаты поиска

Содержание AMX MXT/D-2000XL-PAN

Отзывы: