Overview - Massio ControlPads
9
Instruction Manual - Massio ControlPads and Keypads
MCP-108
The following table lists the specifications for the MCP-108:
MCP-108 Specifications
General:
Dimensions (HWD):
4 11/16" x 6" x 1" (119 mm x 152.5 mm x 26 mm)
Weight:
Approximately 0.41 lb (0.19 kg)
Mounting Options:
Mount onto standard 2 gang US, UK, or EU back boxes
Front Panel Components:
• 8 Buttons
• 1 Volume Knob with Push Mute
• 7 LED Bar Graph Indicator
Colors Available:
• Black: MCP-108-BL (
FG2102-08-BL
)
• White: MCP-108-WH (
FG2102-08-W
)
Active Power Requirements:
Voltage, DC (Typical):
PoE (37V-57V)
Voltage DC Range:
37V-57V per 802.3af specification
Power Connector:
(1) RJ-45 Ethernet
Maximum Power Draw:
5.0W, plus any power used by the I/O port, which can draw up to an additional 6.0W.
Power Supply:
External, Required:
Any POE injector or switch, conforming to the 802.3af standard including AMX’s PS-POE-AF-TC (
FG423-83
),
not included
Environmental:
Temperature (Operating):
32º F to 104º F (0º C to 40º C)
Temperature (Storage):
14º F to 140º F (-10º C to 60º C)
Humidity (Operating):
5% to 85% RH
Ethernet:
Ethernet Connection:
(1) 10/100; Port provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows
you to use either straight-through or crossover Ethernet cables. The Ethernet Port LEDs show
communication activity, connection status, speeds, and mode information.
Control Ports and Indicators:
RS-232 Port:
(2) 3-position 3.5mm Screw Terminals; 300 - 115,200 baud
IR/Serial Port:
(2) 2-position 3.5mm Screw Terminals; IR Transmit / 1-way Serial ports
Support high-frequency carriers up to 1.142 MHz
I/O Channels:
(1) 4-position 3.5 mm Screw Terminal; 2-channel binary I/O port for contact closure with each input being
capable of voltage sensing
Relay Connection:
(1) 4-position 3.5mm Screw Terminal; (2) single-pole, single-throw relays
Each relay can switch up to 24 V
DC
or 28 V
AC
@ 1 A
Each relay is independently controlled
Program Port:
(1) USB Mini-B, USB
ID Pushbutton
Reset factory settings, reset factory image, toggle between DHCP or static IP addressing mode
Memory:
Flash:
4 GB
Memory Card:
4 GB SD
DDRAM:
256 MB
Certifications:
• FCC Class B
• CE EN 55022
• EN 55024
• IEC/EN-60950-1
• UL 60950-1
