1 of 2
Workrite Ergonomics | (800) 959–9675 www.workriteergo.com
User Guide, Revo Platform UB2100FT25
Note: Mount your adjustable keyboard arm to your worksurface and your platform to the arm using the instructions
that came with your hardware. Step 1 and Step 2 may have been performed during installation.
Route Keyboard and Mouse Cords on Keyboard Platform
Place keyboard cord under
overhang at either end of Optimizer.
Place mouse cord under overhang
closest to the mouse.
Route the mouse cord into the slot
at back rear corner of the Optimizer.
Be sure to leave enough slack
in cord to allow for unrestricted
movement of the mouse.
Attach Cord Clips, Route Cords on Arm and Under Worksurface
Note: Make sure your keyboard arm is fully extended
before routing your cables.
Place one Cord Clip from your keyboard platform
hardware kit on the side of the arm mechanism. Place the
other Cord Clip on the rear of the track. Do the opposite
side in the same fashion if cords run down the left side.
Cord Clip from Keyboard
Platform hardware kit.
Document Holder
The Revo Platform feature a convenient document holder. Just insert
your document into the slot in the Optimizer.
UB2100FT25
Caution: Keyboard Clip adhesion
is designed to bond immediately.
You will not be able to reposition
the clip once it's in place.
2
1
a
a
b
b
Optimizer
Overhang
E
E
Under Worksurface
Arm fully extended
Cables will be out
of the way when
platform is in use
3
Optimizer
