15
INSTALLATION
Only For Qualified Installers
Place conversion sticker (provided in Kit) on the valve. This
is to permanently mark the valve that it has been converted
to Natural Gas. This label is important in the event that the
valve is ever removed and mixed in with other valves.
6
Mark the proper box on the
label with a permanent marker.
Note
: If no conversion is made,
the box for the propane box must
still be marked by the installer.
7
Note: The higher the orifice number the smaller
hole in the tip. For example, a number 52
orifice has a larger hole than a number 60
orifice.
5
Reinstall burner module back into the
stove with the four bolts that were
removed. Check gasket for damage
and replace if necessary. Check for
gas leaks when finished.
9
Verify gas inlet and manifold pressures are within the
specifications on the appliance data plate located inside the
bottom of the unit.
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.
