9
Setup and Connections
• Ensure that the power switch of this unit and other equipment to be
connected is set to off before commencing connection.
• Do not block ventilation holes of any of the equipment and arrange
them so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and
video cables.
• Select the appropriate screen shape at the initial setting “TV Aspect ”
according to your TV set (4:3 or 16:9), see page 26.
TV
To S-Video input
To audio input (red/white)
To power outlet (AC 230V/50 Hz)
To video input
(yellow)
Note:
• If the DVD/CD player is connected to the TV through a video cassette
recorder, the picture may not be played back normally with some DVDs.
If this is the case, do not connect the player via the VCR.
• The S (separate) video output connector separates the color (C) and
luminance (Y) signals before transmitting them to the TV set in order to
achieve a sharper picture. Use the S-video cable (optional) when con-
necting the player to a TV set equipped with an S-video input for
improved picture clarity.
• Most European TV´s are equipped with SCART connectors rather than
with a normal video input (yellow cinch). In that case the SCART con-
nection should be used, providing the audio signal too, (see page 8).
Use separate analog audio connections to TV only if your TV is
connected to the video or S-video output.
• When the audio signal is fed to stereo or Pro Logic amplifiers/decoders
or receivers rather than to the TV, connect the Audio Out jacks to any
normal audio input on your amplifier/decoder/receiver. The DVD10 will
”downmix” Dolby Digital recordings to Pro Logic, available on these
connectors, all analog surround or stereo signals will be fed to them
directly.
Connecting to a stereo TV set and stereo or Pro Logic Amplifier/Receiver
