11
Connecting to a TV set or monitor with SCART con-
nectors
Important Notes on SCART and RGB format:
• Your DVD10 is equipped with two SCART connectors, one for direct
connection to the TV, the second (AUX) for throughput of VCR or any
other video source to a TV with only one SCART input. The signal from
this video source will be routed through the SCART connector of the
DVD to the TV automatically when the unit plays (composite video
only).
• Both SCART connectors provide the video signal as well as audio
(stereo L/R) signals.
• The SCART connector for the TV provides the composite video signal as
well as the direct RGB signal, delivering the best video performance
possible. To view RGB video on your TV, the RGB compatible SCART
connector must be used. Configure this connector to RGB (e.g. in the
TV’s menu), if necessary. Note that with RGB video the colour intensity
cannot be adjusted.
• When the RGB video signal is used, DVD´s recorded with the NTSC for-
mat (with regional code ”Zero” ) or 2 can be viewed on Non-NTSC
compatible TVs.
Setup and Connections
TV or Monitor
To SCART connector.
To SCART connector of any
video source.
To optical or coaxial input of
Dolby Digital/DTS
Decoder/Amplifier/Receiver.
To analog input of
stereo or Pro Logic
Amplifier/Receiver.
