Harman Kardon BDP 1/120 Скачать руководство пользователя

Страница: 14 / 54

REAR-PANEL CONNECTIONS

Remote Infrared (IR) Input

and

Output:

When the front-panel Remote

IR sensor is blocked, connect the IR Output of your receiver/processor
or an optional IR receiver to the Remote IR Input jack. The Remote IR
Output may be connected to the Remote IR Input of a compatible
product for remote control through the BDP 1. When several devices
are used, connect them in “daisy chain” fashion.

Composite Video Output:

If your video display does not have HDMI

or component video inputs, connect this video output to your A/ V
receiver/processor or directly to the display.

Component Video Outputs:

If your A/ V receiver, surround processor

or video display is not equipped for HDMI or DVI, connect these jacks
to the corresponding inputs on the receiver or TV. If your video display
has component input jacks marked “High Definition,” use those jacks.

Analog Audio Outputs:

If you are not using either HDMI or a separate

optical or coaxial digital audio connection, connect these jacks to the
A/V receiver or TV. Connect these jacks in addition to a digital audio
connection to make recordings for personal use, or for a multizone
system.

Coaxial

and

Optical Digital Audio Outputs:

If your A/V receiver or

surround processor is not capable of processing the audio from an HDMI
stream, connect either of these digital audio outputs (but not both) to
the receiver/processor.

HDMI Output:

Connect to an HDMI-compatible A / V receiver or video

display device. If your A/ V receiver or surround processor is capable
of decoding audio from the HDMI stream, no further audio connection
is needed.

NOTE:

If your A/V receiver or video display uses DVI connections,

use an optional HDMI-to-DVI adapter or cable, and make a
separate audio connection. If your DVI-equipped display is not
HDCP-compliant, you must use an analog video connection.

Network Jack:

Connect this standard RJ45 jack to a broadband

network (Ethernet) connection so that you may take full advantage of
BD-Live updates, features and enhancements of the BonusView system.
When the network connection is “live,” the lights on either side of the
jack will flash to indicate network activity.

NOTE:

When the BDP 1 is used with an IP-based or wireless

control device, connect a router/access point here, making
certain that one connection runs from the router to a broadband
Internet connection.

Master Power Switch:

Flip on to apply power to the BDP 1, placing

it in the Standby mode. When the unit will not be used for an extended
period of time, or whenever it is necessary to remove the unit from the
AC power lines, flip the switch off.

AC Power Input:

Connect the supplied AC power cord to this socket

first, and then to an unswitched AC outlet. Should the cord become
damaged, contact your authorized Harman Kardon dealer for a
replacement.

Fan Vents:

This area contains vents used by the BDP 1’s fan to cool

the system. Maintain a clearance of at least 3 inches to the nearest
surface, to avoid overheating the unit.

for BDP1

harman/kardon

BDP 1 / BDP 10 Service Manual