Harman Kardon AVR 8000 Скачать руководство пользователя

Страница: 42 / 60

Notes on Using the AVR 8000 Remote
With Other Devices

• Manufacturers may use different code sets

for the same product category. For that rea-
son, it is important that you check to see
whether the code set you have entered oper-
ates as many controls as possible. If it
appears that only a few functions operate,
check to see whether another code set will
work with more buttons.

• When a button is pressed on the AVR 8000

remote, the red light under the

Input

Selector

for the product being

operated should flash briefly. If the Device
Control Selector flashes for some but not all
buttons for a particular product, it does NOT
indicate a problem with the remote but rather
that no function is programmed for the but-
ton being pushed.

Volume Punch-Through

The AVR 8000’s remote may be programmed to
operate the

Volume Control

and

Mute

functions of either the TV or the AVR 8000

in conjunction with any of the devices con-
trolled by the remote. For example, since the
AVR 8000 will likely be used as the sound sys-
tem for TV viewing, you may wish to have the
AVR 8000’s volume activated, although the
remote is set to run the TV. Either the
AVR 8000 or TV volume control may be associ-
ated with any of the remote’s devices. To pro-
gram the remote for Volume Punch-Through,
follow these steps:

1. Press the

Input Selector

for the unit

you wish to have associated with the volume
control and the

Mute Button

at the

same time until the red light appears under
the

Input Selector

and note that the

Program/SPL Indicator

will flash

amber.

2. Press the

Volume Up Button

and

note that the

Program/SPL Indicator

will stop flashing and stay amber.

3. Press either the

AVR Selector

or the

Input Selector

, depending on which

system’s volume control you wish to have
attached for the punch-through mode. The

Program/SPL Indicator

will blink

green three times and then go out to
confirm the data entry.

Example:

To have the AVR 8000’s volume

control activated even though the remote
is set to control the TV, first press the

Video 2/TV Input Selector

and the

Mute Button

at the same time. Next,

press the

Volume Up Button

, fol-

lowed by the

AVR Selector

NOTE:

Should you wish to return the remote to

the original configuration after entering a
Volume Punch-Through, you will need to repeat
the steps shown above. However, press the same
Input Selector in Steps 1 and 3.

Channel Control Punch-Through

The AVR 8000’s remote may be programmed to
operate so that the channel control function for
either the TV, cable or satellite receiver used in
your system may be used in conjunction with
one of the other devices controlled by the
remote. For example, while using and controlling
the VCR, you may wish to change channels on a
cable box or satellite receiver without having to
change the device selected by the AVR 8000 or
the remote. To program the remote for Channel
Control Punch-Through, follow these steps:

1. Press the

Input Selector Button

for

the device you wish to have the channel con-
trol associated with and the

Mute Button

at the same time until the red light

appears under the

Input Selector

and

the

Program/SPL Indicator

flashes

amber.

2. Press the

Volume Down Button

. The

Program/SPL Indicator

will stop flash-

ing and stay amber.

3. Press and release the

Input Selector

Button

for the device that will be used

to change the channels. The

Program/SPL

Indicator

will blink green three times

and then go out to confirm the data entry.

Example:

To control the channels using your

Cable Box or Satellite Receiver while the
remote is set to control the VCR, first press
the

VID 1/VCR Input Selector Button

and the

Mute Button

at the same

time. Next, release them and press the

Volume Down Button

, followed by the

VID 2/TV Input Selector Button

NOTE:

To remove the Channel Control Punch-

Through and return the remote to its original

configuration, repeat the steps shown in the
example above. However, press the same

Input Selector

in Steps 1 and 3.

Transport Control Punch-Through

The AVR 8000’s remote may be programmed to
operate so that the

Transport Control

Functions

(Play, Stop, Fast Forward,

Rewind, Pause and Record) for a VCR, DVD or
CD will operate in conjunction with one of the
other devices controlled by the remote. For
example, while using and controlling the TV, you
may wish to start or stop your VCR or DVD with-
out having to change the device selected by the
AVR 8000 or the remote. To program the remote
for Transport Control Punch-Through, follow
these steps:

1. Press the

Input Selector

for the device

you wish to have the channel control associ-
ated with and the

Mute Button

at the

same time until the red light appears under
the

Input Selector

and the

Program/

SPL Indicator

flashes amber.

2. Press the

Play Button

. The

Program/

SPL Indicator

will stop flashing and

stay amber.

3. Press and release the

Input Selector

Button

for the device that will be used

to change the channels. The

Program/SPL

Indicator

will blink green three times

and then go out to confirm the data entry.

Example:

To control the transport of a DVD

player while the remote is set to control the
TV, first press the

VID 2/TV Input Selector

Button

and the

Mute Button

the same time. Next, release them and press
the

Play Button

, followed by the

DVD

Input Selector Button

NOTE:

To remove the Channel Control Punch-

Through and return the remote to its original
configuration, repeat the steps shown in the
example above. However, press the same

Input Selector

in Steps 1 and 3.

NOTE:

Before programming the remote for

Volume, Channel or Transport Punch-Through,
make certain that any programming needed for
the specific TV, CD, DVD, Cable or Satellite
Receivers has been completed.