Harman Kardon AVR 146 Скачать руководство пользователя страница 6

Страница: 6 / 172

Main Power Switch:

This mechanical switch turns the power supply

on or off. It is usually left pressed in (On position), and cannot be turned
on using the remote control.

Standby/On Switch:

This electrical switch turns the receiver on

for playback, or leaves it in Standby mode for quick turn-on using this
switch or the remote control.

Power Indicator:

This LED has three possible modes. When main

power is turned off, the LED is dark and the receiver won’t respond
to any button presses. When main power is turned on, but before the
Standby/On Switch is used, the LED turns amber to indicate that the
receiver is in standby mode and ready to be turned on. When the
receiver is turned on, the LED turns blue.

Source Select:

Press this button to select a source device, which is

a component where a playback signal originates, e.g. DVD, CD, cable TV,
satellite or HDTV tuner.

Source Indicators:

The name of the current source input lights up.

The indicated input changes each time the Source Select button is
pressed.

Volume Knob:

Turn this knob to raise or lower the volume, which

will be shown in decibels (dB) in the Message Display.

Message Display:

Various messages appear in this two-line display

in response to commands and changes in the incoming signal. When
the on-screen display menu system (OSD) is in use, the message OSD
ON will appear to remind you to check the video display.

Tuner Band:

Press this button to select the tuner as the source, or to

switch between the AM and FM bands.

Tuning:

Press either side of this button to tune a radio station.

Tuning Mode:

This button toggles between manual (one frequency

step at a time) and automatic (seeks frequencies with acceptable signal
strength) tuning mode. It also toggles between stereo and mono modes
when an FM station is tuned.

Preset Stations:

Press this button to select a preset radio station.

Headphone Jack:

Plug a 1/4" headphone plug into this jack for

private listening.

Surround Mode:

Press this button to select a surround sound

(e.g., multichannel) mode group. Choose from the Dolby modes,
DTS modes, Logic 7 modes, DSP modes or Stereo modes.

Surround Select:

After you have selected the desired surround

mode group, press this button to select a specific mode.

Surround Mode Indicators:

One or more of these icons may light

up as you select different surround modes. The Message Display also
indicates the surround mode.

Analog Audio, Video and Digital Audio Inputs:

Connect a

source component that will only be used temporarily, such as a camera
or game console to these jacks. Remember to use only one type of
audio and one type of video connection.

Speaker/Channel Input Indicators:

The box icons indicate

which speaker positions you have configured, and the size (frequency
range) of each speaker. When a digital audio input is used, letters will
light inside the boxes to indicate which channels are present in the
incoming signal.

FRONT-PANEL CONTROLS

AVR146-OM.qxd 2/5/07 3:58 PM Page 8

AVR146