Harman Kardon AVR 146 Скачать руководство пользователя страница 19

Страница: 19 / 172

HDMI 1 Source

The HDMI 1 source is used with a device that is capable of outputting
digital video through an HDMI connection, such as a DVD, HD-DVD or
Blu-ray Disc player or HDTV tuner. The HDMI 1 source is not used with
any of the 2-channel analog audio or video inputs on the AVR 146.

Since the AVR 146 is not capable of processing either the audio or video
signal transmitted via the HDMI connection, you will need to connect the
source’s coaxial digital audio output to the Coaxial 2 digital audio input
on the AVR 146, or use the 6-channel inputs. See Figure 24. You will
also need to make sure your video display is HDMI-capable, and for many
source devices, the display must be HDCP-compliant (High-Bandwidth
Digital Content Protection) in order to display copy-protected materials.
The AVR 146 is Simplay HD-verified, for compatibility via the HDMI
connection with other Simplay HD-verified products.

If your source or video display is equipped with a DVI (Digital Video
Interface) input, you may use an HDMI-to-DVI adapter (not included).

Figure 24 – HDMI and Coaxial 2 Inputs

HDMI 2 Source

The HDMI 2 source is used with a second device that is capable of
outputting digital video through an HDMI connection, such as a DVD,
HD-DVD or Blu-ray Disc player. The HDMI 2 source is not used with any
of the 2-channel analog audio or video inputs on the AVR 146.

Since the AVR 146 is not capable of processing either the audio or video
signal transmitted via the HDMI connection, you will need to connect the
source’s optical digital audio output to the Optical 2 digital audio input
on the AVR 146, or use the 6-channel inputs. See Figure 25. You will
also need to make sure your video display is HDMI-capable, and for many
source devices, the display must be HDCP-compliant (High-Bandwidth
Digital Content Protection) in order to display copy-protected materials.

If your source or video display is equipped with a DVI (Digital Video
Interface) input, you may use an HDMI-to-DVI adapter (not included).

Figure 25 – HDMI 2 and Optical 2 Inputs

The CD source is used for a strictly audio device, such as a CD player.

Referring to Table 2, connect your CD player to the CD Analog Audio
inputs

and

to any available digital audio input. See Figure 26.

Figure 26 – CD Audio Inputs and Digital Audio Inputs

No video connections are needed.

Tape

The Tape source is used for audio-only recorders, such as a CDR,
MiniDisc or cassette deck.

Referring to Table 2, connect your recorder to the Tape Analog
Audio inputs and outputs, and to any available digital audio input
(and the coax digital audio output). See Figure 27.

Figure 27 – Tape Audio Inputs and Outputs, and Digital Audio Inputs and Outputs

Remember to connect the

output

jacks on your recorder to the Tape

or digital audio

input

jacks on the AVR, and the

input

jacks on your

recorder to the Tape or coax digital audio

output

jack on the AVR.

No video connections are needed.

With Harman Kardon’s optional The Bridge, you can play audio, video
or still images stored on your iPod (not included), use your AVR 146
remote control to operate the iPod, and even charge the iPod while it’s
docked in The Bridge.

Simply plug the proprietary cable from The Bridge into the special
The Bridge/DMP connector on the rear of the AVR 146. See Figure 28.
Refer to the owner’s manual for The Bridge to select the appropriate
insert to match your iPod.

Figure 28 – The Bridge/DMP Connector

Step Five – Connect the Video Display

Only video connections should be made between the receiver and
your video display (TV), unless your TV is the source for your television
programming (see Video 2 Source, above).

You will need to make a video connection for each type of video used
for your sources. In addition, even if you didn’t use S-video or composite
video for any of your sources, one of these video monitor connections
is required to view the AVR 146’s on-screen menus and displays.

First, determine what types of video your display is capable of handling.
Remember that HDMI is preferred, followed by component video,
S-video and then composite video. Ideally, this guided you in selecting
the video connections for your sources.

Next, note which types of video connections you used for your source
devices. Make sure you didn’t use a better type of video connection
for a source than your video display can handle. If so, you will need to
disconnect the source and use a video connection that’s compatible
with your display.

The

Bridge

INSTALLATION

AVR146-OM.qxd 2/5/07 3:59 PM Page 23

AVR146