Harman Kardon AVR 146 Скачать руководство пользователя страница 10

Страница: 10 / 172

REMOTE CONTROL FUNCTIONS

The AVR 146 remote is capable of controlling up to ten devices, including
the AVR itself and an iPod docked in the optional The Bridge accessory.
During the installation process, you may program the codes for each
of your source components into the remote. Each time you wish to use
the codes for any component, first press the Selector button for that
component. This changes the button functions to the appropriate codes
for that product.

NOTE:

Several of the Input Selectors are shared between two

devices. Each press of those Input Selectors will toggle between
the device whose name is printed on the button (selector lights
in red) and the device whose name is printed above the button
(selector lights in green).

Each Input Selector has been preprogrammed to control certain types
of components, with only the codes specific to each brand and model
changing, depending on which product code is programmed. The
device types programmed into each selector, except the HDMI 1 and
2 selectors, may not be changed.

DVD:

Controls DVD players and recorders.

CD:

Controls CD players and recorders.

Tape:

Controls cassette decks.

Video 1:

Controls VCRs, TiVo and DVRs.

Video 2:

Controls cable and satellite television set-top boxes.

Video 3:

Controls televisions and other video displays.

HDMI 1 and 2:

Each code set controls a source device (VCR/PVR,

DVD player or cable/satellite set-top box) connected to one of these
two inputs.

The Bridge/DMP:

Controls an iPod docked in The Bridge.

For example, if you have inserted a disc in your CD player and you
would like to skip ahead three tracks, but you then find that the volume
is too loud, you would follow this procedure:

Press the CD Input Selector to switch to the codes that control your

CD player.

Press the Play Button (in the Transport Controls section) if the disc

is not already playing.

Press the Skip Up Button three times to advance three tracks.

Press the AVR Button so that you can access the Volume Controls.

Press the Volume Down Button until the volume level is satisfactory.

Any given button may have different functions, depending on which
component is being controlled. Some buttons are labeled with these
functions. For example, the Sleep and DSP Surround Buttons are
labeled for use as Channel Up/Down Buttons when controlling a televi-
sion or cable box. See Table A8 in the appendix for listings of the
different functions for each type of component.

IR Transmitter Lens:

As buttons are pressed on the remote,

infrared codes are emitted through this lens. Make sure it is pointing
toward the component being operated.

Power On Button:

Press this button to turn on the AVR or another

device. The Master Power Switch on the AVR 146’s front panel must
first have been switched on.

Mute Button:

Press this button to mute the AVR 146’s speaker and

headphone outputs temporarily. To end the muting, press this button
or adjust the volume. Muting is also canceled when the receiver is
turned off.

Program Indicator:

This LED lights up or flashes in one of three colors

as the remote is programmed with codes.

Power Off Button:

Press this button to turn off the AVR 146 or

another device.

AVR Selector:

Press this button to switch the remote to the codes

that operate the receiver.

Input Selectors:

Press one of these buttons to select a source

device, which is a component where a playback signal originates, e.g.,
DVD, CD, cable TV, satellite or HDTV tuner, or an iPod docked in the
optional The Bridge. This will also turn on the receiver and switch the
remote’s mode to operate the source device.

AM/FM Button:

Press this button to select the tuner as the source,

or to switch between the AM and FM bands.

6-Channel Input Selector:

Press this button to select the

6-Channel Inputs as the audio source. The receiver will use the video
input and remote control codes for the last-selected video source.

Test Tone:

Press this button to activate the test tone for manual

output-level calibration.

TV/Video:

This button has no effect on the receiver, but is used to

switch video inputs on some video source components.

Sleep Button:

Press this button to activate the sleep timer, which

turns off the receiver after a programmed period of time of up to
90 minutes.

Volume Controls:

Press these buttons to raise or lower the volume,

which will be shown in decibels (dB) in the Message Display.

DSP Surround:

Press this button to select a DSP surround mode

(Hall 1, Hall 2, Theater).

On-Screen Display (OSD):

Press this button to activate the

on-screen menu system.

Channel Level:

Press this button to adjust the output levels for

each channel so that all speakers sound equally loud at the listening
position. Usually this is done while playing an audio selection, such as
a favorite CD, after you have configured the speakers, as described in
the Initial Setup section.

AVR146-OM.qxd 2/5/07 3:58 PM Page 12

AVR146