7
Radial Winch
35.2 ST E/HY
Installation and Maintenance Manual
The winch can be installed following one of the two procedures below (Procedure1 or Procedure 2):
Procedure 1
To install the winch you must remove the drum and use Socket Head (SH) bolts.
Tools needed:
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
1. Pull out the disconnect rod n°30
2. Unscrew the central screw ( 2Nm/18 in-lb)
3. Slide off the assy socket n°28 and the cover
n°29.
Pay attention to the o-ring in the socket.
4. Unscrew the three screws n°27
( 4Nm/35 in-lb)
