background image

19

E. OPERATION: BEFORE USE

PRE-USE PROCEDURES:

Prior to cooking in your smoker, it is important to 
“season” your smoker. Seasoning seals the paint and 

interior of the smoker to enhance flavouring, durability 

and overall performance. This is also referred to as the 
“breaking-in” process.

To season your smoker, simply place woodchips into the 

wood chip box and water in the water bowl and fire up 

your smoker. Burn at a low temperature (with no food 
inside) for 45-60 minutes. Once this is complete, let the 
smoker cool and clean out the used water and ash from 

the wood chips box.  Once this process is complete, the 
interior of your smoker will have a fine coat of residue 

that will help protect your smoker.

ADDING WATER:

Note: your smoker should never be used without water 
in the water bowl.

To add water prior to cooking, simply remove the water 

bowl and fill it with water – up to 1” (2.5cm) below the 

rim.  Then place the bowl back onto the rack.

To add water whilst the smoker is in operation, DO NOT 
pull out the water bowl beyond the rack. Instead using 
protective mitts and a watering can or cup, add water 
directly to the bowl.

To obtain extra flavour, you can add herbs or marinade to 

the water in the water bowl.

For easy cleaning, you can line the water bowl with 
aluminium foil before each use.

CAUTION

: The water bowl will get very hot during use. 

Avoid handling it and always use protective mitts when 
handling any hot compontents.

ADDING WOOD:

To add wood prior to cooking, simply remove the wood 

chip box, take off the lid and add your choice of flavoured 

hardwood chips. The amount and type of wood you use is 
up to you. Never use treated wood or sawdust. Once you 
have added the wood chips, place the lid back onto the 

top of the box and place the box inside the smoker.

To add wood chips whilst the smoker is in use, use 
protective mitts and long tongs or pliers to remove the 

box lid. Then add more wood chips without removing the 
box. It is not recommended you remove the wood chip 
box whilst smoking is in operation.

WARNING

: Do not use sawdust or treated woods with 

this smoker.

CAUTION

: The wood chip box and lid get very hot during 

use. Avoid handling them and always use protective 
mitts when handling any hot compontents.

USING FLAVOURED WOOD:

Small hardwood chips work best with this smoker.

Use dry hardwoods such as hickory, pecan, apple,
cherry or mesquite.

Most fruit or nut tree woods produce excellent
smoke flavour.

Do no use resinous woods such as pine or plywood.

These will produce unpleasant flavours.

Most smoke flavouring takes place within the first

hour of smoking. Less is often more and no more

wood chips maybe required after this first hour.

Experiment with different types and quantities of
wood chips, depending on what meats or fish you
are smoking. Different woods can also be mixed

together.

To produce more smoke and to prevent fast burning,
pre-soak the wood chips in a separate bowl of water
for at least 20 minutes prior to smoking. Or, wrap
the chips in perforated aluminium foil.

Only use perforated foil wraps over the wood chips
when smoking at low temperatures.

WARNING

: Wood pellets must never be soaked in water.

WARNING

: Do not use sawdust or treated woods with 

this smoker.

HK0522 2 Door Gas Smoker-Manual_v45.indd   19

15

/

4

/1

9

   2:40 pm

Содержание HK0522W




























Отзывы: