12
STEP 6
Locate
: Two Side Handles [18], eight 1/4- 20x1/2”
Screw [1a], and eight 1/4-20 Flange Nuts [2a].
Tools needed:
Philips head screwdriver and
a 7/16” wrench or pliers.
Procedure:
•
Use four 1/4-20x1/2” Screw [1a] and four 1/4-20
Flange Nuts [2a] to attach the handle on the
right side of the smoker cabinet [1].
•
Mount the other side handle [8] to the left side
of the cabinet [1] as shown. Use four 1/4-
20x1/2” Screw [1a] and four 1/4-20 Flange Nuts
[2a] to attach the handle.
•
Securely tighten the screws.
STEP 7
Locate:
The upper and lower doors (2) and (3).
Tools needed:
None.
Procedure:
•
Re-mount the smoker doors[2] and (3) to the
cabinet by positioning the pin in the hinges
welded to the smoker cabinet(1).
STEP 8
Locate:
The door handles (15) and 4 x ¼-20
shoulder
screws
. (Please note the ¼-20
shoulder screws
are
already
located on the door handles and not in the
hardware bag.
Tools Needed:
Shifter or 3/8” & 7/16 wrench.
Procedure:
•
Attach each door handle (15) through the holes
in the front of the doors and secure with 2 x
¼-20 flange nuts at the back of the door.
STEP 9
Locate:
Door Latch Fastener (16) and 4 x 10-24x1/2”
screws.
Tools Needed:
Phillips head screwdriver.
Procedure:
•
Attached each Door Latch (16) to the side of the
smoker cabinet using 2 x
10-24x1/2”
screws
for each latch. Make sure that the handle faces
forward. The upper section of the cabinet door
has two latch’s and the lower door has one.
HK0522 2 Door Gas Smoker-Manual_v45.indd 12
15
/
4
/1
9
2:40 pm
