Hardy Instruments Any-Weigh, Руководство по эксплуатации и установке

Страница: 13 / 52

Any-Weigh™ Series Floor Scales
5
back from them. The C2
®
second generation
electronic calibration is included with your scale.
FIG. 2 SUMMING JUNCTION CARD
3. Load Sensors - The AnyWeigh series scales use
four (4) steel Advantage like load sensors with
hermetic seals. The output of each sensor is 2mV/
V with 5 Volts DC excitation. For more specifica-
tions see the electrical specification section of
this manual.
4. INTEGRATED TECHNICIAN™ (Option) -
(If IT summing card is installed) A built-in sys-
tem diagnostics utility, continuously monitors the
weighing system for possible malfunctions. This
capability also allows the operator to rapidly
troubleshoot a weighing system from the control-
ler or indicator.
5. Leveling Feet - Each AnyWeigh series scale
comes with four (4) 304 stainless steel adjustable
leveling feet. The leveling feet are adjustable to a
maximum of 7mm (.275"). The leveling feet are
attached to each of the load sensors.
SITE PREPARATION • All mounting surfaces for the floor scale
should be level to within 3º, corner to corner,
end to end. Keep in mind that the adjustable
leveling feet have a maximum adjustment of
7mm (.275”).