Selection variants device type/manufacturer
eCB1 (internal)
an eCB1-LR PV is installed at the house connection
another eCB1
an eCB1-LR MP+ is installed at the house connection
B-control Energy
Manager
a B-Control Energy Manager (EM 100, EM 210, EM
300) is installed at the house connection
SMA Energy Meter
a SMA Energy Meter or a Home Manager 2.0 is
installed at the house connection
Fronius measuring point
a Fronius smartmeter is installed which can be read
via the Fronius inverter.
Kostal measuring point
a Kostal smartmeter is installed at the house
connection
Janitza UMG power
quality analyser
a Janitza UMG network analyser is installed at the
house connection
KLEFR 6934 Meter
a KLEFR Energy Meter is installed at the house
connection
PHOENIX CONTACT
measuring point
a Phoenix Contact measuring point is installed at the
house
Passive push updated
measuring point
via http Post (via API gateway) updated measuring
point
No measuring point
There is no measuring point installed*
*If no device is installed at the house connection “
no measuring point
” ca be chosen.
Then the house connection stays deactivated and no input is saved.
Note: I
n this case it´s not possible to enable a PV-regulated load or a house connection
limit.
Click “
proceed
“ to get into the next section.
Configuration instructions
eCB1
smartmeter
Version: 1.2.3
19
