Manual setting
Click on the
date button
and select the desired date from the calendar. Then click the
time
button
and enter the current time.
Please separate the hours, minutes and seconds with colons.
To complete the settings, press “
Set time
” and the settings will be saved.
Automatic setting
In this case “Date” and “Time” do not need any entries.
There are pre-set internet pages in section “
NTP Server 1
” and “
NTP Server 2
”. These will
connect you automatically with a time server.
Click on “
Set time by ntp
” to save your settings.
If you want to connect with a different, or your own time server, please enter the internet
address manually.
By clicking “
automatic synchronise at boot
”, the time will be synchronised automatically
after every outage (power, network, etc.).
After completion of the time and date settings, click on “
proceed
” to get to the next
section.
Network settings
If you choose “
DHCP
” as protocol:
Your DHCP-Server (e. g. router) will do
further settings automatically and fill the
remaining blank spaces.
There are no other settings to be made in
the section except selecting a
hostname
.
Please select a distinct host name.
The device should respond to the given
hostnamen (givenname.local). Upon delivery
the hostname given is „
ecb1.local
“.
Configuration instructions
eCB1
smartmeter
Version: 1.2.3
10
