Product description
Your cPµ1 charging station permits safe and comfortable charging of electric vehicles
according to Norm IEC 61851-1, Mode 3.
Depending on the respective variant your cPµ1 is laid out for charging as fast as possible
due to its circuit design and its diameter of cables and pins.
The cPµ1 also offers a fixed charging cable according to IEC 62196-2 of either Type 1 or
Type 2, depending on your variant.
We set maximum value on the user‘s safety on all of our products. Therefore, the cPµ1
Wallboxes offer effective protection against short circuit, electric shock and other threats
because of its protection equipment.
Via two LED lights on the housing, the user is always informed about the current state of
the charging station.
I
dentifying your product variant
The cPµ-series consists of multiple variants which differ in charging cable and charging capacity.
Therefore they serve different implementation profiles. Inside the housing of the Wallbox you
will find an identification plate. Open the housing cover before installation and operation in
order to verify the type of variant with help of the identification plate:
In particular the model description (cPµ1
XTYY) and data of the power supply
(voltage, power frequency, current) are
relevant for identification.
Detailed information to cPµ1 charging stations can be found in section ”Technical
specifications” on page 24.
Instruction Manual
cPμ1
charging station
Version: 1.3.3
12
