Hardi EZ-Guide Plus Скачать руководство пользователя страница 25

Страница: 25 / 30

EZ-Guide® Plus

Menu

option

Description

Default

value

Guidance

LED Mode

Chase – Chase the lights to stay online. The

Chase

lights represent the swath location relative

the

vehicle.

Pull – Center the lights to stay online.

The lights represent the vehicle location relative

the

swath.

LED Spacing

Distance represented by one LED.

1' 0"

Look Ahead

Look ahead time in seconds.

Gives advanced warning of turns by projecting

the current position forward. Use this to allow for

reaction time and vehicle turn speed.

Increase this value for larger vehicles that take

longer to turn.

Auto-detect Turn

Enable or disable Auto-detect Turn for the

Adaptive Curve pattern.

Reset Nudge

Resets nudge back to 0".

—

Warnings

Back to Main Menu Returns to main menu

—

Headland Warning

Turn on or off the headland warning.

Warning – ON

Configure the warning lead time.

Lead time – 0s

Offline Warning

Distance off-swath at which the offline warning

0' 0"

message appears. Set to zero to disable the

warning.

Low Acc Warning

High Acc Only – Accept only high accuracy

Warn Low Acc

positions.

Warn Low Acc – Accept all positions, but

warn when low accuracy.

No Warning – Accept all positions, including

less accurate positions, without warning.

Audible Warning

Turn on or off the audible warning alarm.

OFF

GPS

Back to Main Menu

Returns to main menu.

—

Diagnostics

Display GPS receiver status and diagnostic

—

information.

Corrections1

Auto – Use the first WAAS, EGNOS, or MSAS

Auto

satellite

tracked.

Custom – Manually turn on or off individual

WAAS, EGNOS, or MSAS satellites.

Off – Do not use any WAAS, EGNOS, or MSAS

corrections.

Содержание EZ-Guide Plus































Результаты поиска

Содержание EZ-Guide Plus

Отзывы:

Похожие инструкции для EZ-Guide Plus

Бренды по названию

Популярные бренды

Hardi EZ-Guide Plus, Руководство по началу работы

Результаты поиска

Содержание EZ-Guide Plus

Отзывы:

Похожие инструкции для EZ-Guide Plus

Бренды по названию

Популярные бренды