HARD H1943-CGP, Руководство по сборке

Страница: 6 / 12

HARDWARE IDENTIFICATION FOR CRIB ASSEMBLY
Our home care Standard Cribs come packed in 3 large boxes on a pallet. One box
contains the mattress, a second box contains the mattress platform, and the last box
contains the crib ends, side rails, slide rods and all hardware. If the crib is ordered with an
IV Pole, it will be in the box with the ends. If the order has an under crib shelf, the shelf
will come in a 4th box.
Remove all the components from the boxes and inspect closely to make sure nothing was
damaged during transport. Locate the hardware bag that is packed in the box with the crib
ends & sides.
Suggested tools for assembly:
Philips Screwdriver
Rubber Mallet
Qty 4
Part #11750 1/2” Plastic Spacer-
To be used at the bottom of the slide rod.
Qty 4
Part #63838 1/4-20x7/8” Screw -
To be used at the top of the slide rod for the rails.
Qty 4
Part #11531 Washer-
To be used at the top of the slide rod for the rails.
Qty 4
Part# 63403 Bumper Spring-
To be used at the bottom of the slide rod- fi ts on slide rod adaptor.
Qty 8
Part# 11545 Plastic Washer-
To be used at the bottom of the slide rod- fi ts around bumper spring
on the slide rod adaptor.
Continued on next page...